FF 230 and FF 500/BL Edge Finder Set
Call For Availability
FF 230 and FF 500/BL Edge Finder Set
Used for fast and accurate location of starting point of work pieces with respect to the machine spindle on milling machines. Size 6 x 6 x 50mm and 6 x 5 x 75mm. Comes in wooden box with sliding lid.
FF 230 and FF 500/BL Milling Cutting Set (2mm-5mm)
In stock
€46.33Milling Cutting Set (2mm-5mm)
All cutters with 6mm shaft. Cutters of Ø 2 - 3 - 4 and 5mm. Double fluted according to DIN 327. Made of HSS-Co5. Comes in wooden box with sliding lid.
FF 230 and FF 500/BL Milling Cutting Set (6mm-10mm)
In stock
FF 230 and FF 500/BL Three Piece Set Centre Drill Set
In stock
Three Piece Set Centre Drill Set
Made of HSS steel. DIN 333 (type A) 60°. Complete set centre drills with sizes of 2 - 2.5 and 3.15mm.
FF 230 Fine Feed
Call For Availability
Fine feed for MICRO miller FF 230
Easily installed in a few seconds. The feed may be used via either the height feed (vertical) or the fine feed in the tilted position. The graduated scale may be zero reset. One revolution is equivalent to 1.5mm spindle travel (1 division = 0.05mm).
FF 400 Splash guard and chip collecting tray
Call For Availability
FF 400 Splash guard and chip collecting tray
Made of 1.5mm thick sheet steel, powder-coated. Secure stand due to drill holes for fastening to a work surface (the use of steel sleeves keeps the tray tightly sealed). L 700mm, W 420mm, H 40mm.
FF 230, FF 400, FF 500, FF 500/CNC, FF 500 - ready for CNC, FF 500/BL, FF 500/BL-CNC and FF 500/BL-CNC-ready as well as for mill/drill unit BFB 2000 and compound table KT 150.
FF 500 and FF 500/BL-CNC Universal dividing table UT 400
Call For Availability
FF 500 and FF 500/BL-CNC Universal dividing table UT 400
For accurate machining of circular work pieces. The table may be fixed horizontally or vertically. Worm drive for division through 360° allowing for almost all possible divisions below 100. Supplied with 4 index plates: 27/42, 33/40, 34/39 and 36/38. Used to manufacture sprockets, gearboxes and drives, ratchets, cams, etc. (the faceplate is not included). The taper is identical to the main spindle of the lathe. With matching nuts and screws for fixation in MICROMOT standard T-slots (12 x 6 x 5mm). Supplied in a wooden box with sliding lid.
FF 500/BL and FF 400 Automatic Universal Axial Feed
Call For Availability
FF 500/BL and FF 400 Automatic Universal Axial Feed
For the X axis of the Miller FF 500/BL. Will also fit the predecessor compound table KT 400 and the Miller FF 400. Simple assembly: The unit is mounted to the compound table with two bolts and automatically drives the spindle of the X-axis. For manual operation the handwheel needs to be mounted on the spindle of the drive-axis. Balanced special DC motor with electronic speed control (full-wave electronics). Manual drive with freewheeling function and two speed levels: Stage 1 for common machining (20 - 75mm/min). Stage 2: for machining at higher speed or quick adjustment of the X axis (90 – 260mm/min). Freewheeling function for manual operation by handwheel.
FF 500/BL and FF 500/BL-CNC MICROMOT adapter
Call For Availability
FF 500/BL and FF 500/BL-CNC. MICROMOT adapter
The standard milling head is exchanged for the adapter in just a few steps. Our 20mm collar enables to fasten all appliances of the MICROMOT 60 series, the MICROMOT precision drill/grinder FBS 240/E and the MICROMOT professional drill/grinder IBS/E. Especially for applications that require high speeds for small milling cutters (e.g. milling electronic boards), but also for micro drilling. Complete with fastening screws.
The professional drill/grinder IBS/E depicted here is not included.
FF 500/BL Digital Position Indicator DA 3.1
In stock
FF 500/BL Digital Position Indicator
With large multi-function display, 3 glass rulers (with one sensor each) and fastening elements.Reasonable for repetitive machining: A second start point in addition to the zero point can be set anywhere. Most important computing functions: - Calculation and indication of a centre position - Basic arithmetic operations - Positioning of drill holes on any straight lines and circular paths - Milling of crooked planes - Milling of radii in different planes
FF 500/BL Fine Feed
Call For Availability
FF 500/BL Fine Feed
Quick and easy to install. The clutch system enables feed via either the drill handle or the handwheel. The handwheel has 0.025 graduations and may be set to zero. 1 division = 0.05mm.
MF 70 and KT 70 Dividing head
In stock
For machining circular work pieces, manufacturing off-set holes and milled out portions, milling key surfaces, four-sided, sixsided materials, etc.
Absolute accurate division due to nonius at the base body. With reversed chuck jaws: Capacity inside 1.5 to 32mm, outside 12 to 65mm. Bore of 11mm (for processing longer spindles in a vertical position).
With fastening bores for horizontal and vertical mounting and suitable slot nuts and fastening screws for mounting to the MICRO miller MF 70 and the MICRO compound table KT 70.
Size: 72 x 64 x 38mm. In wooden box with sliding lid.
Miller FF 500/BL
Call For Availability
Miller FF 500/BL
With variable speed pre-selection from 200 - 4,000rpm and high precision (accuracy 0.05mm). With digital speed indication.
Characteristics:
- The sophisticated control via rotor position and speed sensors guarantees high torque for use of large milling cutters in the lower speed range.
- Solid column with dovetail guides. Milling head can be rotated to the left and right by 90° (with graduation).
- The clampable spindle sleeve is prepared for mounting of the fine feed adapter.
- Tool holder using multiple range collets type ER 20: One each of 6 - 8 - 10 and 12mm are included.
- Height adjustment of milling head via hand wheel.
- Solid plane-milled steel compound table with 3 continuous MICROMOT standard T-slots (12 x 6 x 5mm).
- All 3 hand wheels with graduated scale ring (1 rev. = 2mm).
Miller FF 500/BL CNC-Ready
Call For Availability
Miller FF 500/BL CNC-Ready
With recirculating ball spindles and powerful step motors at all 3 axes.
Interesting for users who already own a control unit or would like to purchase one from another provider on the market.
Three standard plugs (SUB-D 9POLE) are available to connect the control unit. The mechanical construction of the miller is identical to the miller FF 500/BL-CNC.
Miller FF 500/BL-CNC
Call For Availability
Miller FF 500/BL-CNC
Characteristics:
- With brushless direct drive: Quiet and vibration-free with high precision (accuracy 0.05mm).
- Variable speed pre-selection from 200 - 4,000rpm with digit speed display.
- With double roller bearing recirculating ball spindles at all 3 axes and 3 powerful step motors for driving compound table and milling head.
- Large travel distances: X-axis: approx. 290mm, Y-axis: approx. 100mm, Z-axis: approx. 200mm.
- Stable column with dovetail slideway.
- Including user-friendly software. Runs under WINDOWS® (see description below).
- Thanks to CNC control of 3 tool axes machining of steel and non-ferrous metals is possible in all dimensions. This also applies to larger work pieces!
- Axes drive with recirculating ball spindles (no backlash) and powerful step motors.
- Otherwise the mechanical design is almost identical to the miller FF 500/BL: Solid, flat-milled compound table in steel with 3 continuous T-slots for size 8 standard T-nuts. Base of vibration-damping cast steel. Stable column with dovetail slideway. Milling head can be pivoted to the left and right by 90°, with powerful, quiet and shock-free running condenser motor.
- Poly V-belt drive for 6 spindle speeds (180 - 2,500/min).
- Additional sleeve feed (30mm) using drilling lever with scale ring (1 graduation line = 1mm). Work piece fixing using steel collets.
- Complete with CNC control unit, CNC programme software, all connecting cables, one each multiple range standard type ER 20 collets 6 - 8 - 10 and 12mm and detailed manual.