Angle polisher WP/E
For perfect surfaces even in tight spots: For finishing of blank surfaces, cleaning, rust removal, for the "finishing touches" after varnishing. Infinitely variable electronic speed control for low and constant speeds even at high grinding pressure. Made in Europe.
Flexible silicon discs
Used for surface smoothing and polishing of precious metals, non-ferrous metals, high-grade metals, glass, porcelain, wood, rubber and plastic. The bullets are very suitable for working tough-to-reach insides. Shafts of Ø 2.35mm.
Diameter: 5mm
Flexible silicon discs
Used for surface smoothing and polishing of precious metals, non-ferrous metals, high-grade metals, glass, porcelain, wood, rubber and plastic. The bullets are very suitable for working tough-to-reach insides. Shafts of Ø 2.35mm.
Flexible silicon discs
Used for surface smoothing and polishing of precious metals, non-ferrous metals, high-grade metals, glass, porcelain, wood, rubber and plastic. The bullets are very suitable for working tough-to-reach insides. Shafts of Ø 2.35mm.
Diameter: 22mm
Footswitch FS
For all machines with a Euro plug (class 2 insulation) and maximum power absorption of 500W. Ideal for both portable and stationary machines.
Long neck angle milling/drilling unit LWB/E
With a set of gears running on several ball bearings in a stable, die-cast aluminium housing head
Machine Vise MS 4
Made of die-cast zinc, the MS 4 is perfect for the TBM 220 bench drill machine and MB 200 drill stand.
MICROMOT drill/grinder 60/E
With a diameter of only 35mm and its low weight (230g) it offers convenient handling second to none in its class. The balanced motor effortlessly drives the ground ball bearing spindle allowing for a quiet run with a pleasant sound.
MICROMOT Flexishaft 110/BF
With 0.3 to 3.2mm quick-action chuck. Dual ball-bearinged milled steel shaft with tool holder for MICROMOT steel collets.
MICROMOT Flexishaft 110/P
Dual ball-bearinged milled steel shaft with tool holder for MICROMOT steel collets. Ball-bearinged shaft end on machine.
MICROMOT mains adapter NG 5/E
With superior capacity of 5A. In compact NORYL casing (heat resistant - recommended for transformers).
Nylon fleece brushes
For cleaning, frosting and sanding steel, stainless steel, nonferrous metals, etc. Shaft Ø 2.35mm.
Microfibre polishing wheel, 15-ply (100mm)
Very soft. For shine polishing of precious and non-precious metals as well as plastic. Especially suitable for spots difficult to access which cannot be reached with rigid discs. Use only with polishing paste or polishing emulsion.
Muslin polishing wheel, stiff (100 x 15mm)
Impregnated and especially stiff. For preliminary and shine polishing of gold, silver, platinum, copper, brass, stainless steel and plastic. Use only with polishing paste or polishing emulsion.
Universal polishing bar (80g) made from polishing compound and wax
Particularly suitable for polishing and high shine polishing of precious and nonprecious metals as well as plastic. Also for freshening tarnished aluminium, copper or brass.
Chamois Polishers
For high burnish polishing of metal, gold, silver, non-ferrous metals, brass, aluminium, ceramics and porcelain with the use of polishing paste. Also for reconditioning painted woods and plastics. Shaft Ø 2.35mm.
For surface smoothing and polishing of the cutting edges of Perspex and plexiglass. The edges are getting clean and plane. With arbor Ø 2.35mm.
Diameter: 22mm
Length: 6mm
For preliminary and high burnish polishing of metal, gold, silver, brass and aluminium with the use of polishing paste. Also for final polishing in mould and die-making. Shaft Ø 2.35. Work with a lower rotational speed when polishing. Soften hard polishing paste with oil or heat up lightly.
Felt Polishers
For high burnish polishing of metal, gold, silver, non-ferrous metals, brass, aluminium, ceramics and porcelain with the use of polishing paste. Also for reconditioning painted woods and plastics. Shaft Ø 2.35mm.
MFor preliminary and high burnish polishing of metal, gold, silver, brass and aluminium with the use of polishing paste. Also for final polishing in mould and die-making. Shaft Ø 2.35. Work with a lower rotational speed when polishing. Soften hard polishing paste with oil or heat up lightly.
For preliminary and high burnish polishing of metal, gold, silver, brass and aluminium with the use of polishing paste. Also for final polishing in mould and die-making. Shaft Ø 2.35. Work with a lower rotational speed when polishing. Soften hard polishing paste with oil or heat up lightly.
For preliminary and high burnish polishing of metal, gold, silver, brass and aluminium with the use of polishing paste. Also for final polishing in mould and die-making. Shaft Ø 2.35. Work with a lower rotational speed when polishing. Soften hard polishing paste with oil or heat up lightly.
Flexible polishing pad set
Especially suitable for working gold, platinum, silver as well as for tool making and castings.
Diameter: 14mm
Length: 12mm
10-piece complete polishing set
For polishing metal, glass, precious metals, porcelain and plastic.
Set Includes: 3 x felt polishing bits (cylinder, cone and wheel shapes), 3 x silicon polishing bits (bullet, cylinder and disc shape),1 x cotton polishing disc, 1 x chamois buffing wheel and polishing paste, 1 x 2.35 x 44mm arbor.
Precision drill grinder FBS 12/EF
For precision drilling, milling, sanding, polishing, brushing, de-rusting, engraving, chiseling and cutting. Power and precision also when wet grinding.
Precision-milled steel machine vice PM 40
Perfectly rectangular. To be placed sideways and on the end face. With matching nuts and screws. Supplied in wooden box with sliding lid.
Precision vice FMZ
Rotates in all directions.
Easily clamps to workbenches and tables of up to 60mm. Alternatively, use 2 standard screws to secure to the work surface. Ball and socket: rotates in all directions (even downwards). 75mm jaws with protective covers (for delicate workpieces). Maximum clamping width 70mm and weight 1.6kg.
Professional drill/grinder IBS/E
For drilling, milling, grinding, polishing, cleaning, cutting, carving, engraving and signing. For precision mechanics, model builders, jewellers, opticians, artists and electronic enthusiasts.High concentric accuracy (maximum runout 3/100mm). No runout in your bits and cutters.
Comes with 34 bits and cutters of industrial quality, all shafts Ø 2.35mm, complete with six triple slit steel collets covering 1.0 to 3.2mm.
Polishing set
Steel wire brush for de-rusting and cleaning steel and non-ferrous metals. Brass wire brush to polish non-ferrous metals and precious metals. Felt wheel is used on painted surfaces and the chamois and cotton wheels provide a high gloss finish on non-ferrous metals and precious metals.
Universal holder UHZ
With ball joint. To be rotated and swivelled in all directions. 20mm collar for MICROMOT drilling and milling devices.
PRIMUS 100
Width of jaws 100mm. Jaw opening 75mm. Distance from long slot centre to long slot centre 135mm. Long slots 105 x 15mm. Weight 5.0kg. Other details as for the PRIMUS 75.
Vice Primus 75
Base body made of special cast iron with CNC-machined guides. Interchangeable gripping jaws. Flat-milled working surface. Spindles with rolled trapezoid thread for ease of operation even during high axial load. Width of jaws 75mm. Jaw opening 65mm. Distance from long slot centre to long slot centre 100mm. Long slots 80 x 11mm. Weight 2.5kg.
Polishing felt, medium hard
For polishing metals (e.g. stainless steel, brass and copper). With hook and loop fastening. Ø 50mm.
Lambswool polishing disc
Of high quality, dense lambswool for polishing scratch-proof paints. With hook and loop fastening. Ø 50mm.