Cordless professional drill/grinder IBS/A
€250.00
Footswitch FS
€24.35Footswitch FS
For all machines with a Euro plug (class 2 insulation) and maximum power absorption of 500W. Ideal for both portable and stationary machines.
Glass Working Set (4 Pieces)
€6.93For engraving, grinding or frosting glass. Diamond bit 1: ball Ø 1.0mm, diamond bit 2: ball Ø 1.8mm, silicon carbide bit cone 3/2 x 5mm, and bullet 2/2.5 x 7mm. All shafts Ø 2.35mm.
Set Includes: 2 x Diamond grinding bits, 2 x Silicon carbide grinding bits.
KT 70 Step clamps made of steel for 30mm
Lithium-ion battery Li/A2
Long neck angle-milling/drilling unit LWB/E
€148.00Long neck angle milling/drilling unit LWB/E
With a set of gears running on several ball bearings in a stable, die-cast aluminium housing head
Long neck straight drill/grinder LBS/E
€139.39
Machine vice MS 4
€20.40Machine Vise MS 4
Made of die-cast zinc, the MS 4 is perfect for the TBM 220 bench drill machine and MB 200 drill stand.
MICRO Shaper MP 400
€282.24
MICROMOT 230/E
€103.00
MICROMOT 60/E with mains adapter and 34bits
€106.50MICROMOT drill/grinder 60/E
MICROMOT drill/grinder 60/E
With a diameter of only 35mm and its low weight (230g) it offers convenient handling second to none in its class. The balanced motor effortlessly drives the ground ball bearing spindle allowing for a quiet run with a pleasant sound.
MICROMOT Flexishaft 110/BF
€39.00MICROMOT Flexishaft 110/BF
With 0.3 to 3.2mm quick-action chuck. Dual ball-bearinged milled steel shaft with tool holder for MICROMOT steel collets.
MICROMOT Flexishaft 110/P
€45.50MICROMOT Flexishaft 110/P
Dual ball-bearinged milled steel shaft with tool holder for MICROMOT steel collets. Ball-bearinged shaft end on machine.
MICROMOT mains adapter NG 5/E
€86.50MICROMOT mains adapter NG 5/E
With superior capacity of 5A. In compact NORYL casing (heat resistant - recommended for transformers).
MICROMOT mains adapter NG/2 E
€46.50- Polarised socket for MICROMOT plug.
- Red LED indicates readiness for use.
- PTC (Positive temperature coefficient) element prevents overload (and plugged in tool will not automatically restart). After cooling down the mains plug should be disconnected briefly to reset the adapter.
- With holes for storing bits.
- Foldable tool rest provides a secure place for keeping the MICROMOT tools at the ready.
- Variable speed control with feedback effect for adjusting bit speed to suit the job, as well as providing high torque at low speeds.
Mill/ Drill MICROMOT 60/EF
€42.90
Milling Bits Wolfram Vanadium Set (3 Pieces)
€6.81Selected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling
Set Includes: 1 x Ø5mm Triangle Milling Bit , 1 x Ø5mm Sphere Milling Bit, 1 x Ø5mm Flat Milling Bit
Note: Recommended to be used with MICROMOT Steel Collets
Milling Bits Wolfram Vanadium Set (5 Pieces)
Selected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling
Recomended to be used with MICROMOT Steel Collets
Milling Bits Wolfram Vanadium Set 10mm
€12.90Selected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling
Diameter: 10mm
Recomended to be used with MICROMOT Steel Collets
Milling Bits Wolfram Vanadium Set 3mm
€5.50Selected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling
Diameter: 3mm
Recomended to be used with MICROMOT Steel Collets
Milling Bits Wolfram Vanadium Set 4mm
€11.40Selected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling
Diameter: 4mm
Recomended to be used with MICROMOT Steel Collets
Milling Bits Wolfram Vanadium Set 6mm
€8.55Selected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling
Diameter: 6mm
Recomended to be used with MICROMOT Steel Collets
Milling Bits Wolfram Vanadium Set 6mm
€8.60Selected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling
Diameter: 6mm
Recomended to be used with MICROMOT Steel Collets
Milling Bits Wolfram Vanadium Set 8mm
€11.40Selected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling.
Diameter: 8mm
Recomended to be used with MICROMOT Steel Collets
Precision drill grinder FBS 12/EF
€58.90Precision drill grinder FBS 12/EF
For precision drilling, milling, sanding, polishing, brushing, de-rusting, engraving, chiseling and cutting. Power and precision also when wet grinding.
Precision drill/grinder FBS 240
€90.50
Precision steel vice PM 40
Precision-milled steel machine vice PM 40
Perfectly rectangular. To be placed sideways and on the end face. With matching nuts and screws. Supplied in wooden box with sliding lid.
Precision vice FMS 75
€54.30
Precision vice FMZ
€54.30Precision vice FMZ
Rotates in all directions.
Easily clamps to workbenches and tables of up to 60mm. Alternatively, use 2 standard screws to secure to the work surface. Ball and socket: rotates in all directions (even downwards). 75mm jaws with protective covers (for delicate workpieces). Maximum clamping width 70mm and weight 1.6kg.
Professional drill/grinder IBS/E
€130.00Professional drill/grinder IBS/E
For drilling, milling, grinding, polishing, cleaning, cutting, carving, engraving and signing. For precision mechanics, model builders, jewellers, opticians, artists and electronic enthusiasts.High concentric accuracy (maximum runout 3/100mm). No runout in your bits and cutters.
Comes with 34 bits and cutters of industrial quality, all shafts Ø 2.35mm, complete with six triple slit steel collets covering 1.0 to 3.2mm.
Rapid battery charger LG/A
€72.00
Router base OFV
Router base OFV
For MICROMOT units with standard 20mm collar. For slotting, milling grooves and milling edges.
Router Bits - Core box bit R 3,2mm
€5.59
Router Bits - Rounding over cutter Ø 6,4mm
€5.75
Router Bits - Slot cutter Ø 3,2mm
€5.59
Router Bits - Slot cutter Ø 4,8mm
€5.50
Router Bits - Slot cutter Ø 6,5mm
€5.50
Router Bits - V-slot cutter Ø 6,5mm
€5.57
Router Bits Set (10 Pieces)
€42.95Included:
- Slot cutter Ø 3.2 - 4.8 and 6.5,
- Rounding over cutter Ø 6.4, - V-slot cutter Ø 6.5, - Combi cutter 6.5/2.5, - Core box bit R 3.2, - Rebating cutter 6.4, - Edge cutter with pin 5, angle cutter 45
Universal holder UHZ
€38.50Universal holder UHZ
With ball joint. To be rotated and swivelled in all directions. 20mm collar for MICROMOT drilling and milling devices.
Vice Primus 100
PRIMUS 100
Width of jaws 100mm. Jaw opening 75mm. Distance from long slot centre to long slot centre 135mm. Long slots 105 x 15mm. Weight 5.0kg. Other details as for the PRIMUS 75.
Vice Primus 75
€74.30Vice Primus 75
Base body made of special cast iron with CNC-machined guides. Interchangeable gripping jaws. Flat-milled working surface. Spindles with rolled trapezoid thread for ease of operation even during high axial load. Width of jaws 75mm. Jaw opening 65mm. Distance from long slot centre to long slot centre 100mm. Long slots 80 x 11mm. Weight 2.5kg.