Bench drill machine TBM 220
€260.00
Cordless professional drill/grinder IBS/A
€250.00
DB 250 Drill chuck with sliding sleeve
€17.07Drill chuck with sliding sleeve for the tailstock of the DB 250
Clamps up to 5mm. Is inserted on the spot of the rotating back centre. The feed movement results from sliding the complete tailstock.
DB 250 Independent four jaw chuck
€38.30
DB 250 Three jaw chuck
€59.76
Drill Bits HSS Set (10 Pieces)
HSS twist drill bit set with centring pin in storage case
6-piece set. Ø 1.5 - 2.0 - 2.5 - 3.0 - 3.5 - 4.0mm. For precision tapping of wood and plastics; also non-ferrous metal, steel and stainless steel sheets. Titanium coating reduces friction and increases service life. Shaft Ø 3mm, 6-piece set.
Drill Bits HSS Set (6 Pieces)
HSS twist drill bits in storage case
10-piece set. Similar to DIN 338. Ø 0.3 - 0.5 - 0.8 - 1 - 1.2 - 1.5 - 2 - 2.5 - 3 - 3.2mm. For drilling non-ferrous metal, steel and stainless steel. In labelled cassette with fold back and stand function. For clamping we recommend our 3-jaw drill chuck.
Drill Bits HSS Set 0,5mm x 6mm
€5.70Selected steel quality. Purpose-made stable construction with high concentricity. Shaft and bit are manufactured from a one-piece blank. High hardness for optimum life expectancy and elasticity. For drilling metal, non-ferrous metals, plastic, PC cards and wood. Work speeds: soft materials approx. 8,000rpm, hard materials approx. 3,000rpm. Ø shanks 2.35mm.
Diameter: 0.5mm
Useful Length: 6mm
Drill Bits HSS Set 0,8mm x 6mm
€5.70Selected steel quality. Purpose-made stable construction with high concentricity. Shaft and bit are manufactured from a one-piece blank. High hardness for optimum life expectancy and elasticity. For drilling metal, non-ferrous metals, plastic, PC cards and wood. Work speeds: soft materials approx. 8,000rpm, hard materials approx. 3,000rpm. Ø shanks 2.35mm.
Diameter: 0.8mm
Useful Length: 6mm
Drill Bits HSS Set 1,2mm x 8mm
€5.66Selected steel quality. Purpose-made stable construction with high concentricity. Shaft and bit are manufactured from a one-piece blank. High hardness for optimum life expectancy and elasticity. For drilling metal, non-ferrous metals, plastic, PC cards and wood. Work speeds: soft materials approx. 8,000rpm, hard materials approx. 3,000rpm. Ø shanks 2.35mm.
Diameter: 1.2mm
Useful Length: 8mm
Drill Bits HSS Set 1,6mm x 8mm
€5.70Selected steel quality. Purpose-made stable construction with high concentricity. Shaft and bit are manufactured from a one-piece blank. High hardness for optimum life expectancy and elasticity. For drilling metal, non-ferrous metals, plastic, PC cards and wood. Work speeds: soft materials approx. 8,000rpm, hard materials approx. 3,000rpm. Ø shanks 2.35mm.
Diameter: 1.6mm
Useful Length: 8mm
Drill Bits HSS Set 1mm x 8mm
€5.70
Drill Bits Tungsten Carbide Set 1,5mm x 8mm
Made of wear-resistant tungsten carbide. For drilling glass, semiprecious stones, porcelain, ceramics, marble and other hard stones. The hard stones are subdivided according to the degree of hardness from 1 - 10. Tungsten carbide can be used up to hardness degree 6. Drilling hard stones with a hardness degree of more than 6 calls for the use of diamond tools. Shaft Ø 3.0mm. With ideal cutting angle of 6°.
Diameter: 1.5mm Length: 8mm
Drill Bits Tungsten Carbide Set 1mm x 8mm
€9.95Tungsten carbide drill bits
Made of wear-resistant tungsten carbide. For drilling glass, semiprecious stones, porcelain, ceramics, marble and other hard stones. The hard stones are subdivided according to the degree of hardness from 1 - 10. Tungsten carbide can be used up to hardness degree 6. Drilling hard stones with a hardness degree of more than 6 calls for the use of diamond tools. Shaft Ø 3.0mm. With ideal cutting angle of 6°.
Diameter: 1mm
Length: 8mm
Drill Bits Tungsten Carbide Set 2mm x 8mm
€11.90Tungsten carbide drill bits
Made of wear-resistant tungsten carbide. For drilling glass, semiprecious stones, porcelain, ceramics, marble and other hard stones. The hard stones are subdivided according to the degree of hardness from 1 - 10. Tungsten carbide can be used up to hardness degree 6. Drilling hard stones with a hardness degree of more than 6 calls for the use of diamond tools. Shaft Ø 3.0mm. With ideal cutting angle of 6°.
Diameter: 2mm
Length: 8mm
Drilling device BV 2000
€277.32Drilling device BV 2000
An accurate device for parallel drilling, thread-cutting and milling. Made of high-precision aluminium die-casting. With 20mm MICROMOT collar.
Footswitch FS
€24.35Footswitch FS
For all machines with a Euro plug (class 2 insulation) and maximum power absorption of 500W. Ideal for both portable and stationary machines.
KT 70 Step clamps made of steel for 30mm
Lithium-ion battery Li/A2
Long neck angle-milling/drilling unit LWB/E
€148.00Long neck angle milling/drilling unit LWB/E
With a set of gears running on several ball bearings in a stable, die-cast aluminium housing head
Long neck straight drill/grinder LBS/E
€139.39
Machine vice MS 4
€20.40Machine Vise MS 4
Made of die-cast zinc, the MS 4 is perfect for the TBM 220 bench drill machine and MB 200 drill stand.
MICRO Compound table KT 70
€128.00MICRO compound table KT 70
Made of solid aluminium with surface treatment and fitted with adjustable dovetail gibs and three T-slots of the MICROMOT standard (12 x 6 x 5mm).
MICROMOT 230/E
€103.00
MICROMOT 60/E with mains adapter and 34bits
€106.50
MICROMOT drill stand MB 200
€127.00MICROMOT drill/grinder 60/E
MICROMOT drill/grinder 60/E
With a diameter of only 35mm and its low weight (230g) it offers convenient handling second to none in its class. The balanced motor effortlessly drives the ground ball bearing spindle allowing for a quiet run with a pleasant sound.
MICROMOT Flexishaft 110/BF
€39.00MICROMOT Flexishaft 110/BF
With 0.3 to 3.2mm quick-action chuck. Dual ball-bearinged milled steel shaft with tool holder for MICROMOT steel collets.
MICROMOT Flexishaft 110/P
€45.50MICROMOT Flexishaft 110/P
Dual ball-bearinged milled steel shaft with tool holder for MICROMOT steel collets. Ball-bearinged shaft end on machine.
MICROMOT mains adapter NG 5/E
€86.50MICROMOT mains adapter NG 5/E
With superior capacity of 5A. In compact NORYL casing (heat resistant - recommended for transformers).
MICROMOT mains adapter NG/2 E
€46.50- Polarised socket for MICROMOT plug.
- Red LED indicates readiness for use.
- PTC (Positive temperature coefficient) element prevents overload (and plugged in tool will not automatically restart). After cooling down the mains plug should be disconnected briefly to reset the adapter.
- With holes for storing bits.
- Foldable tool rest provides a secure place for keeping the MICROMOT tools at the ready.
- Variable speed control with feedback effect for adjusting bit speed to suit the job, as well as providing high torque at low speeds.
Mill/ Drill MICROMOT 60/EF
€42.90
Precision drill grinder FBS 12/EF
€58.90Precision drill grinder FBS 12/EF
For precision drilling, milling, sanding, polishing, brushing, de-rusting, engraving, chiseling and cutting. Power and precision also when wet grinding.
Precision drill/grinder FBS 240
€90.50
Precision steel vice PM 40
Precision-milled steel machine vice PM 40
Perfectly rectangular. To be placed sideways and on the end face. With matching nuts and screws. Supplied in wooden box with sliding lid.
Precision vice FMS 75
€54.30
Precision vice FMZ
€54.30Precision vice FMZ
Rotates in all directions.
Easily clamps to workbenches and tables of up to 60mm. Alternatively, use 2 standard screws to secure to the work surface. Ball and socket: rotates in all directions (even downwards). 75mm jaws with protective covers (for delicate workpieces). Maximum clamping width 70mm and weight 1.6kg.
Professional drill/grinder IBS/E
€130.00Professional drill/grinder IBS/E
For drilling, milling, grinding, polishing, cleaning, cutting, carving, engraving and signing. For precision mechanics, model builders, jewellers, opticians, artists and electronic enthusiasts.High concentric accuracy (maximum runout 3/100mm). No runout in your bits and cutters.
Comes with 34 bits and cutters of industrial quality, all shafts Ø 2.35mm, complete with six triple slit steel collets covering 1.0 to 3.2mm.
Rapid battery charger LG/A
€72.00
TBM 220 Chuck
€8.60Chuck
For drill shank sizes 0.5 to 6.5mm. Max. speed 10,000rpm. Industrial quality with extra high speed accuracy. With 3/8" thread for MICROMOT bench drill TBM 220.
Three-jaw steel drill chuck
€6.50Three-jaw steel drill chuck
For use with MICROMOT rotary tools Precision drill grinder FBS 12/EF, Precision drill/grinder FBS 240/E, MICROMOT 60/EF and Flexishaft 110/BF. Advantageous when working with different shafts. Capacity: 0.3 - 3.2mm.
Universal holder UHZ
€38.50Universal holder UHZ
With ball joint. To be rotated and swivelled in all directions. 20mm collar for MICROMOT drilling and milling devices.
Vice Primus 100
PRIMUS 100
Width of jaws 100mm. Jaw opening 75mm. Distance from long slot centre to long slot centre 135mm. Long slots 105 x 15mm. Weight 5.0kg. Other details as for the PRIMUS 75.
Vice Primus 75
€74.30Vice Primus 75
Base body made of special cast iron with CNC-machined guides. Interchangeable gripping jaws. Flat-milled working surface. Spindles with rolled trapezoid thread for ease of operation even during high axial load. Width of jaws 75mm. Jaw opening 65mm. Distance from long slot centre to long slot centre 100mm. Long slots 80 x 11mm. Weight 2.5kg.