DB 250 Drill chuck with sliding sleeve
€17.07Drill chuck with sliding sleeve for the tailstock of the DB 250
Clamps up to 5mm. Is inserted on the spot of the rotating back centre. The feed movement results from sliding the complete tailstock.
Diamond Cutting Discs 20mm
€9.95Diamond cutting discs
Only 0.6 thick. For cutting and sanding of porcelain, ceramics, glass fibre boards, plastic and non-ferrous metals. Shaft of Ø 2.35mm.
Diameter: 20mm
Diamond Cutting Discs 20mm with Cooling Holes
€13.00Diamond-coated cutting discs with cooling holes
For cutting, grinding and deburring. Same application as described on the left. Less heating up due to cooling holes. No burn marks! Shaft Ø 2.35mm.
Diamond Cutting Discs 38mm
€8.15Diamond cutting discs
Only 0.6 thick. For cutting and sanding of porcelain, ceramics, glass fibre boards, plastic and non-ferrous metals. Shaft of Ø 2.35mm.
Diameter: 38mm
Diamond Cutting Discs 38mm with Cooling Holes
€10.00Diamond-coated cutting discs with cooling holes
For cutting, grinding and deburring. Same application as described on the left. Less heating up due to cooling holes. No burn marks! Shaft Ø 2.35mm.
Diamond Grinding Bits (1,8mm x 5mm)
€2.75Diamond grinding bits
With consistently even coating of diamond dust. Bodies and shafts made from stainless steel. Used for grinding, engraving and chiselling steel (even chrome-cobalt alloy), glass, ceramics, porcelain and plastics. All shafts Ø 2.35mm.
Diameter: 1.8mm
Useful Length: 5mm
Diamond Grinding Bits 5mm
€5.44Diamond grinding bits
With consistently even coating of diamond dust. Bodies and shafts made from stainless steel. Used for grinding, engraving and chiselling steel (even chrome-cobalt alloy), glass, ceramics, porcelain and plastics. All shafts Ø 2.35mm.
Diameter: 5mm
Diamond Grinding Bits Set 1,8mm
€4.35With consistently even coating of diamond dust. Bodies and shafts made from stainless steel. Used for grinding, engraving and chiselling steel (even chrome-cobalt alloy), glass, ceramics, porcelain and plastics. All shafts Ø 2.35mm.
Diameter: 1.8mm
Diamond Grinding Bits Set 1mm
€4.22Diamond grinding bits
With consistently even coating of diamond dust. Bodies and shafts made from stainless steel. Used for grinding, engraving and chiselling steel (even chrome-cobalt alloy), glass, ceramics, porcelain and plastics. All shafts Ø 2.35mm.
Diameter: 5mm
Drill Bits Tungsten Carbide Set 1,5mm x 8mm
Made of wear-resistant tungsten carbide. For drilling glass, semiprecious stones, porcelain, ceramics, marble and other hard stones. The hard stones are subdivided according to the degree of hardness from 1 - 10. Tungsten carbide can be used up to hardness degree 6. Drilling hard stones with a hardness degree of more than 6 calls for the use of diamond tools. Shaft Ø 3.0mm. With ideal cutting angle of 6°.
Diameter: 1.5mm Length: 8mm
Drill Bits Tungsten Carbide Set 1mm x 8mm
€9.95Tungsten carbide drill bits
Made of wear-resistant tungsten carbide. For drilling glass, semiprecious stones, porcelain, ceramics, marble and other hard stones. The hard stones are subdivided according to the degree of hardness from 1 - 10. Tungsten carbide can be used up to hardness degree 6. Drilling hard stones with a hardness degree of more than 6 calls for the use of diamond tools. Shaft Ø 3.0mm. With ideal cutting angle of 6°.
Diameter: 1mm
Length: 8mm
Drill Bits Tungsten Carbide Set 2mm x 8mm
€11.90Tungsten carbide drill bits
Made of wear-resistant tungsten carbide. For drilling glass, semiprecious stones, porcelain, ceramics, marble and other hard stones. The hard stones are subdivided according to the degree of hardness from 1 - 10. Tungsten carbide can be used up to hardness degree 6. Drilling hard stones with a hardness degree of more than 6 calls for the use of diamond tools. Shaft Ø 3.0mm. With ideal cutting angle of 6°.
Diameter: 2mm
Length: 8mm
Flexible Silicon Discs 5mm (5 Pieces)
€7.90Flexible silicon discs
Used for surface smoothing and polishing of precious metals, non-ferrous metals, high-grade metals, glass, porcelain, wood, rubber and plastic. The bullets are very suitable for working tough-to-reach insides. Shafts of Ø 2.35mm.
Diameter: 5mm
Flexible Silicon Discs Set 22mm (10 Pieces)
Flexible silicon discs
Used for surface smoothing and polishing of precious metals, non-ferrous metals, high-grade metals, glass, porcelain, wood, rubber and plastic. The bullets are very suitable for working tough-to-reach insides. Shafts of Ø 2.35mm.
Flexible Silicon Discs Set 22mm (5 Pieces)
Flexible silicon discs
Used for surface smoothing and polishing of precious metals, non-ferrous metals, high-grade metals, glass, porcelain, wood, rubber and plastic. The bullets are very suitable for working tough-to-reach insides. Shafts of Ø 2.35mm.
Diameter: 22mm
Holder for bits and cutters
Holder for bits and cutters
For the clean storage of micro drills, grinding bits, brushes and other rotating tools with shaft diameters of 2.35 - 3.2mm. Without bits and cutters. 2 pieces are included in the delivery.
Polishing Chamois Set 22mm
€4.10Chamois Polishers
For high burnish polishing of metal, gold, silver, non-ferrous metals, brass, aluminium, ceramics and porcelain with the use of polishing paste. Also for reconditioning painted woods and plastics. Shaft Ø 2.35mm.
Polishing Felts Set 22mm
€4.10Felt Polishers
For high burnish polishing of metal, gold, silver, non-ferrous metals, brass, aluminium, ceramics and porcelain with the use of polishing paste. Also for reconditioning painted woods and plastics. Shaft Ø 2.35mm.
M
Polishing Set (10 Pieces)
€17.0510-piece complete polishing set
For polishing metal, glass, precious metals, porcelain and plastic.
Set Includes: 3 x felt polishing bits (cylinder, cone and wheel shapes), 3 x silicon polishing bits (bullet, cylinder and disc shape),1 x cotton polishing disc, 1 x chamois buffing wheel and polishing paste, 1 x 2.35 x 44mm arbor.
SP/E Polishing Set
€30.15Polishing set
Steel wire brush for de-rusting and cleaning steel and non-ferrous metals. Brass wire brush to polish non-ferrous metals and precious metals. Felt wheel is used on painted surfaces and the chamois and cotton wheels provide a high gloss finish on non-ferrous metals and precious metals.
THERMOCUT Replacement cutting wire
€9.70
Three-jaw steel drill chuck
€6.50Three-jaw steel drill chuck
For use with MICROMOT rotary tools Precision drill grinder FBS 12/EF, Precision drill/grinder FBS 240/E, MICROMOT 60/EF and Flexishaft 110/BF. Advantageous when working with different shafts. Capacity: 0.3 - 3.2mm.
WP/E Polishing Felts Lambswool (2 Pieces)
€8.10Lambswool polishing disc
Of high quality, dense lambswool for polishing scratch-proof paints. With hook and loop fastening. Ø 50mm.