Showing 60 of 111 results
Brass Brushes
Ideal for working on brass, brass alloys, copper, precious metals, semiprecious stones, plastic and wood. For cleaning of electronic components and circuit boards. Shaft of Ø 2.35mm.
Diameter: 13mm
Brass Brushes
Ideal for working on brass, brass alloys, copper, precious metals, semiprecious stones, plastic and wood. For cleaning of electronic components and circuit boards. Shaft of Ø 2.35mm.
Diameter: 8mm
Steel brushes
High quality components for best operation. For cleaning, removing rust, sanding, frosting, roughening, rounding-off, etc. of metal, cast iron, plastic, stone and wood. Shaft of Ø 2.35mm.
Diameter: 13mm
Steel brushes
High quality components for best operation. For cleaning, removing rust, sanding, frosting, roughening, rounding-off, etc. of metal, cast iron, plastic, stone and wood. Shaft of Ø 2.35mm.
Diameter: 8mm
Replacement belts for BS/E
Corundum on tear-resistant, woven backing. Sands metal, nonferrous metals, wood and plastics efficiently. 10 x 330mm.
Replacement belts for BS/E
Corundum on tear-resistant, woven backing. Sands metal, nonferrous metals, wood and plastics efficiently. 10 x 330mm.
Pack of 5 pieces Grinding bands made from high-quality corundum (aluminium oxide). Mounted on a high-performance support. For the sanding of metal, non-ferrous metals, wood and plastics. Size: 40 x 260mm.
Pack of 5 pieces Grinding bands made from high-quality corundum (aluminium oxide). Mounted on a high-performance support. For the sanding of metal, non-ferrous metals, wood and plastics. Size: 40 x 260mm.
Tungsten carbide cutting disc
Thickness approx. 2mm. For cutting and profiling wood, CFK, GRP, rubber, silicone. Cooling holes reduce heating up. Shaft Ø 2.35.
Cutting blades made of spring steel
0.1mm thick. For plastic, wood and non-ferrous metal. Shaft Ø 2.35mm. For freehand work, we recommend using the Protective Device.
Set Includes: 1 x Cutting Blade Ø16mm, 1 x Cutting Blade Ø19mm, 1 x Cutting Blade Ø22mm
Aluminium oxide cutting discs with reinforcement
The cutting discs are available in Ø 22 x 0.8mm and Ø 38 x 1.0mm. Nearly unbreakable, making them usable to remove stock. Will cut alloyed, standard and stainless steels, non-ferrous metals and even wood and plastic. Arbor shaft of Ø 2.35mm.
Aluminium oxide cutting discs with reinforcement
The cutting discs are available in Ø 22 x 0.8mm and Ø 38 x 1.0mm. Nearly unbreakable, making them usable to remove stock. Will cut alloyed, standard and stainless steels, non-ferrous metals and even wood and plastic. Arbor shaft of Ø 2.35mm.
Aluminium oxide cutting discs with reinforcement
The cutting discs are available in Ø 22 x 0.8mm and Ø 38 x 1.0mm. Nearly unbreakable, making them usable to remove stock. Will cut alloyed, standard and stainless steels, non-ferrous metals and even wood and plastic. Arbor shaft of Ø 2.35mm.
Drill chuck with sliding sleeve for the tailstock of the DB 250
Clamps up to 5mm. Is inserted on the spot of the rotating back centre. The feed movement results from sliding the complete tailstock.
Diamond cutting discs
Only 0.6 thick. For cutting and sanding of porcelain, ceramics, glass fibre boards, plastic and non-ferrous metals. Shaft of Ø 2.35mm.
Diameter: 20mm
Diamond-coated cutting discs with cooling holes
For cutting, grinding and deburring. Same application as described on the left. Less heating up due to cooling holes. No burn marks! Shaft Ø 2.35mm.
Diamond cutting discs
Only 0.6 thick. For cutting and sanding of porcelain, ceramics, glass fibre boards, plastic and non-ferrous metals. Shaft of Ø 2.35mm.
Diameter: 38mm
Diamond-coated cutting discs with cooling holes
For cutting, grinding and deburring. Same application as described on the left. Less heating up due to cooling holes. No burn marks! Shaft Ø 2.35mm.
Diamond grinding bits
With consistently even coating of diamond dust. Bodies and shafts made from stainless steel. Used for grinding, engraving and chiselling steel (even chrome-cobalt alloy), glass, ceramics, porcelain and plastics. All shafts Ø 2.35mm.
Diameter: 1.8mm
Useful Length: 5mm
Diamond grinding bits
With consistently even coating of diamond dust. Bodies and shafts made from stainless steel. Used for grinding, engraving and chiselling steel (even chrome-cobalt alloy), glass, ceramics, porcelain and plastics. All shafts Ø 2.35mm.
Diameter: 5mm
Ball-shaped diamond-coated grinding bits for glass and stone
For drilling and machining of glass and types of stone reaching to granite. Recommended for use on drill presses with a speed of 2,000rpm with the addition of coolant. Shaft Ø 2,35mm.
Diameter: 1.2mm
With consistently even coating of diamond dust. Bodies and shafts made from stainless steel. Used for grinding, engraving and chiselling steel (even chrome-cobalt alloy), glass, ceramics, porcelain and plastics. All shafts Ø 2.35mm.
Diameter: 1.8mmDiamond grinding bits
With consistently even coating of diamond dust. Bodies and shafts made from stainless steel. Used for grinding, engraving and chiselling steel (even chrome-cobalt alloy), glass, ceramics, porcelain and plastics. All shafts Ø 2.35mm.
Diameter: 5mm
Ball-shaped diamond-coated grinding bits for glass and stone
For drilling and machining of glass and types of stone reaching to granite. Recommended for use on drill presses with a speed of 2,000rpm with the addition of coolant. Shaft Ø 2,35mm.
Diameter: 2.2mm
Ball-shaped diamond-coated grinding bits for glass and stone
For drilling and machining of glass and types of stone reaching to granite. Recommended for use on drill presses with a speed of 2,000rpm with the addition of coolant. Shaft Ø 2,35mm.
Diameter: 3.2mm
For drilling holes in (semi) precious stones, etc. Shaft Ø 2.35mm.
Set Includes: 1 x Diamond Twist Drill Bit Ø0.8mm x 5mm, 1 x Diamond Twist Drill Bit Ø1.2mm x 5mm
HSS twist drill bit set with centring pin in storage case
6-piece set. Ø 1.5 - 2.0 - 2.5 - 3.0 - 3.5 - 4.0mm. For precision tapping of wood and plastics; also non-ferrous metal, steel and stainless steel sheets. Titanium coating reduces friction and increases service life. Shaft Ø 3mm, 6-piece set.
HSS twist drill bits in storage case
10-piece set. Similar to DIN 338. Ø 0.3 - 0.5 - 0.8 - 1 - 1.2 - 1.5 - 2 - 2.5 - 3 - 3.2mm. For drilling non-ferrous metal, steel and stainless steel. In labelled cassette with fold back and stand function. For clamping we recommend our 3-jaw drill chuck.
Selected steel quality. Purpose-made stable construction with high concentricity. Shaft and bit are manufactured from a one-piece blank. High hardness for optimum life expectancy and elasticity. For drilling metal, non-ferrous metals, plastic, PC cards and wood. Work speeds: soft materials approx. 8,000rpm, hard materials approx. 3,000rpm. Ø shanks 2.35mm.
Diameter: 0.5mm
Useful Length: 6mm
Selected steel quality. Purpose-made stable construction with high concentricity. Shaft and bit are manufactured from a one-piece blank. High hardness for optimum life expectancy and elasticity. For drilling metal, non-ferrous metals, plastic, PC cards and wood. Work speeds: soft materials approx. 8,000rpm, hard materials approx. 3,000rpm. Ø shanks 2.35mm.
Diameter: 0.8mm
Useful Length: 6mm
Selected steel quality. Purpose-made stable construction with high concentricity. Shaft and bit are manufactured from a one-piece blank. High hardness for optimum life expectancy and elasticity. For drilling metal, non-ferrous metals, plastic, PC cards and wood. Work speeds: soft materials approx. 8,000rpm, hard materials approx. 3,000rpm. Ø shanks 2.35mm.
Diameter: 1.2mm
Useful Length: 8mm
Selected steel quality. Purpose-made stable construction with high concentricity. Shaft and bit are manufactured from a one-piece blank. High hardness for optimum life expectancy and elasticity. For drilling metal, non-ferrous metals, plastic, PC cards and wood. Work speeds: soft materials approx. 8,000rpm, hard materials approx. 3,000rpm. Ø shanks 2.35mm.
Diameter: 1.6mm
Useful Length: 8mm
Coarse Toothed Blades (No. 9: 14 teeth per 25mm)
Super-Cut" scroll saw blades. High quality steel for extended use and prolonged cutting capacity. Standard version without pin. Hard and soft woods, plastic, Perspex and soft non-ferrous metal.
Very fine-toothed blades (No. 1: 50 teeth per 25mm)
Super-Cut" scroll saw blades. High quality steel for extended use and prolonged cutting capacity. Standard version without pin. Hard and soft woods, plastic, Perspex and soft non-ferrous metal.
Standard Toothed Blades (No. 5: 17 teeth per 25mm)
Super-Cut" scroll saw blades. High quality steel for extended use and prolonged cutting capacity. Standard version without pin. Hard and soft woods, plastic, Perspex and soft non-ferrous metal.
DS 460 Standard Coarse-toothed blades with Pins (10 TPI per 25mm)
For cutting soft and hard wood, plastics as well as other soft materials and especially thicker work pieces.
DS 460 Standard Fine-toothed blades with Pins (25 TPI per 25mm)
For cutting soft and hard wood, plastics as well as other soft materials and especially thicker work pieces.
DS 460 Standard Normal-toothed blades with Pins (18 TPI per 25mm)
For cutting soft and hard wood, plastics as well as other soft materials and especially thicker work pieces.
Flexible silicon discs
Used for surface smoothing and polishing of precious metals, non-ferrous metals, high-grade metals, glass, porcelain, wood, rubber and plastic. The bullets are very suitable for working tough-to-reach insides. Shafts of Ø 2.35mm.
Diameter: 5mm
Flexible silicon discs
Used for surface smoothing and polishing of precious metals, non-ferrous metals, high-grade metals, glass, porcelain, wood, rubber and plastic. The bullets are very suitable for working tough-to-reach insides. Shafts of Ø 2.35mm.
Flexible silicon discs
Used for surface smoothing and polishing of precious metals, non-ferrous metals, high-grade metals, glass, porcelain, wood, rubber and plastic. The bullets are very suitable for working tough-to-reach insides. Shafts of Ø 2.35mm.
Diameter: 22mm
Holder for bits and cutters
For the clean storage of micro drills, grinding bits, brushes and other rotating tools with shaft diameters of 2.35 - 3.2mm. Without bits and cutters. 2 pieces are included in the delivery.
KGS 80 Tungsten tipped Disc
Extremely clean cut edges thanks to high tooth count when cutting balsa, plywood, soft wood and glass reinforced plastic boards. Also for cutting hard wood, POLYCARBONATE, plastics and aluminium. Also for table saw FET.
KGS 80 Cutting disc with reinforcement
Corundum-bound and shatter-proof. For cutting alloyed and non-alloyed steel, stainless steel and non-ferrous metals. Also suitable for wood and plastics.
Crosscut 'Super-Cut' blade
58mm diameter (10mm bore). 80 alternately set teeth. Ideal for hard and soft wood as well as plastic and Pertinax. For fast, clean cuts. Teeth are individually set and sharpened. Superior cutting power!
KS 230 Saw blade HSS
50mm diameter (10mm bore), 0.5mm thick. Alloy holding a high proportion of tungsten, vanadium and molybdenum for an even structure, high hardness and long lifetime. Fine-toothed. For very fine cuts in non-ferrous metals (aluminium, brass, copper). Also suitable for cutting compound materials like PC cards, and sawing wood and plastics.
KS 230 Saw Tungsten tipped saw blade
50mm Ø x 1.1mm (10mm bore). 20 teeth. For extremely clean cuts of balsa, plywood. Can also be used for cutting PC cards and POLYCARBONATE.
Solid carbide saw blade
50mm diameter (10mm bore). 0.5mm thick. Fine toothed: ideal for cutting fibreglass sheets up to 3mm, non-ferrous metals, duro-plastics and other 'difficult' materials.
Self-adhesive type, for use with corundum bound sanding discs and sanding fleece. Ø 50mm.
With woven reinforcement, 50 x 1 x 10mm. For cutting steel, non-ferrous metals, plastic and wood. Ø 50mm.
For grinding tempered cast iron, cast iron, stainless steel, non-ferrous metals, wood and plastic. Low wear-resistant. Ø 50mm.