Showing 60 of 113 results
Brass Brushes
Ideal for working on brass, brass alloys, copper, precious metals, semiprecious stones, plastic and wood. For cleaning of electronic components and circuit boards. Shaft of Ø 2.35mm.
Diameter: 13mm
Brass Brushes
Ideal for working on brass, brass alloys, copper, precious metals, semiprecious stones, plastic and wood. For cleaning of electronic components and circuit boards. Shaft of Ø 2.35mm.
Diameter: 8mm
Replacement belts for BS/E
Corundum on tear-resistant, woven backing. Sands metal, nonferrous metals, wood and plastics efficiently. 10 x 330mm.
Replacement belts for BS/E
Corundum on tear-resistant, woven backing. Sands metal, nonferrous metals, wood and plastics efficiently. 10 x 330mm.
BS/E Replacement Belts Silicon carbide 180 Grit (5 Pieces)
Identical with the foregoing item, but with burrs made from silicon carbide for grinding and de-burring of glass and ceramics. Also suitable for grinding brass, steel and cast iron.
Pack of 5 pieces Grinding bands made from high-quality corundum (aluminium oxide). Mounted on a high-performance support. For the sanding of metal, non-ferrous metals, wood and plastics. Size: 40 x 260mm.
Pack of 5 pieces Grinding bands made from high-quality corundum (aluminium oxide). Mounted on a high-performance support. For the sanding of metal, non-ferrous metals, wood and plastics. Size: 40 x 260mm.
Cutting blades made of spring steel
0.1mm thick. For plastic, wood and non-ferrous metal. Shaft Ø 2.35mm. For freehand work, we recommend using the Protective Device.
Set Includes: 1 x Cutting Blade Ø16mm, 1 x Cutting Blade Ø19mm, 1 x Cutting Blade Ø22mm
Corundum cutting discs
Discs made of a special compound of diameter 22 or 38 x 0.7mm. Used to part alloys and metals, stainless steels and non-ferrous metals. Can also be used for cutting wood and plastic. Shaft of Ø 2.35.
Aluminium oxide cutting discs with reinforcement
The cutting discs are available in Ø 22 x 0.8mm and Ø 38 x 1.0mm. Nearly unbreakable, making them usable to remove stock. Will cut alloyed, standard and stainless steels, non-ferrous metals and even wood and plastic. Arbor shaft of Ø 2.35mm.
Aluminium oxide cutting discs with reinforcement
The cutting discs are available in Ø 22 x 0.8mm and Ø 38 x 1.0mm. Nearly unbreakable, making them usable to remove stock. Will cut alloyed, standard and stainless steels, non-ferrous metals and even wood and plastic. Arbor shaft of Ø 2.35mm.
Corundum cutting discs
Discs made of a special compound of diameter 22 or 38 x 0.7mm. Used to part alloys and metals, stainless steels and non-ferrous metals. Can also be used for cutting wood and plastic. Shaft of Ø 2.35.
Corundum cutting discs
Discs made of a special compound of diameter 22 or 38 x 0.7mm. Used to part alloys and metals, stainless steels and non-ferrous metals. Can also be used for cutting wood and plastic. Shaft of Ø 2.35.
Corundum cutting discs
Discs made of a special compound of diameter 22 or 38 x 0.7mm. Used to part alloys and metals, stainless steels and non-ferrous metals. Can also be used for cutting wood and plastic. Shaft of Ø 2.35.
Aluminium oxide cutting discs with reinforcement
The cutting discs are available in Ø 22 x 0.8mm and Ø 38 x 1.0mm. Nearly unbreakable, making them usable to remove stock. Will cut alloyed, standard and stainless steels, non-ferrous metals and even wood and plastic. Arbor shaft of Ø 2.35mm.
Drill chuck with sliding sleeve for the tailstock of the DB 250
Clamps up to 5mm. Is inserted on the spot of the rotating back centre. The feed movement results from sliding the complete tailstock.
Diamond cutting discs
Only 0.6 thick. For cutting and sanding of porcelain, ceramics, glass fibre boards, plastic and non-ferrous metals. Shaft of Ø 2.35mm.
Diameter: 20mm
Diamond-coated cutting discs with cooling holes
For cutting, grinding and deburring. Same application as described on the left. Less heating up due to cooling holes. No burn marks! Shaft Ø 2.35mm.
Diamond cutting discs
Only 0.6 thick. For cutting and sanding of porcelain, ceramics, glass fibre boards, plastic and non-ferrous metals. Shaft of Ø 2.35mm.
Diameter: 38mm
Diamond-coated cutting discs with cooling holes
For cutting, grinding and deburring. Same application as described on the left. Less heating up due to cooling holes. No burn marks! Shaft Ø 2.35mm.
HSS twist drill bit set with centring pin in storage case
6-piece set. Ø 1.5 - 2.0 - 2.5 - 3.0 - 3.5 - 4.0mm. For precision tapping of wood and plastics; also non-ferrous metal, steel and stainless steel sheets. Titanium coating reduces friction and increases service life. Shaft Ø 3mm, 6-piece set.
HSS twist drill bits in storage case
10-piece set. Similar to DIN 338. Ø 0.3 - 0.5 - 0.8 - 1 - 1.2 - 1.5 - 2 - 2.5 - 3 - 3.2mm. For drilling non-ferrous metal, steel and stainless steel. In labelled cassette with fold back and stand function. For clamping we recommend our 3-jaw drill chuck.
Selected steel quality. Purpose-made stable construction with high concentricity. Shaft and bit are manufactured from a one-piece blank. High hardness for optimum life expectancy and elasticity. For drilling metal, non-ferrous metals, plastic, PC cards and wood. Work speeds: soft materials approx. 8,000rpm, hard materials approx. 3,000rpm. Ø shanks 2.35mm.
Diameter: 0.5mm
Useful Length: 6mm
Selected steel quality. Purpose-made stable construction with high concentricity. Shaft and bit are manufactured from a one-piece blank. High hardness for optimum life expectancy and elasticity. For drilling metal, non-ferrous metals, plastic, PC cards and wood. Work speeds: soft materials approx. 8,000rpm, hard materials approx. 3,000rpm. Ø shanks 2.35mm.
Diameter: 0.8mm
Useful Length: 6mm
Selected steel quality. Purpose-made stable construction with high concentricity. Shaft and bit are manufactured from a one-piece blank. High hardness for optimum life expectancy and elasticity. For drilling metal, non-ferrous metals, plastic, PC cards and wood. Work speeds: soft materials approx. 8,000rpm, hard materials approx. 3,000rpm. Ø shanks 2.35mm.
Diameter: 1.2mm
Useful Length: 8mm
Selected steel quality. Purpose-made stable construction with high concentricity. Shaft and bit are manufactured from a one-piece blank. High hardness for optimum life expectancy and elasticity. For drilling metal, non-ferrous metals, plastic, PC cards and wood. Work speeds: soft materials approx. 8,000rpm, hard materials approx. 3,000rpm. Ø shanks 2.35mm.
Diameter: 1.6mm
Useful Length: 8mm
Coarse Toothed Blades (No. 9: 14 teeth per 25mm)
Super-Cut" scroll saw blades. High quality steel for extended use and prolonged cutting capacity. Standard version without pin. Hard and soft woods, plastic, Perspex and soft non-ferrous metal.
Very fine-toothed blades (No. 1: 50 teeth per 25mm)
Super-Cut" scroll saw blades. High quality steel for extended use and prolonged cutting capacity. Standard version without pin. Hard and soft woods, plastic, Perspex and soft non-ferrous metal.
Standard Toothed Blades (No. 5: 17 teeth per 25mm)
Super-Cut" scroll saw blades. High quality steel for extended use and prolonged cutting capacity. Standard version without pin. Hard and soft woods, plastic, Perspex and soft non-ferrous metal.
High-alloy special steel (HSS)
Ø 80 x 1.1 x 10mm, 250 teeth. Use on non-ferrous metals, soft and hard woods, laminates, GRP, CFK and composite boards.
Flexible silicon discs
Used for surface smoothing and polishing of precious metals, non-ferrous metals, high-grade metals, glass, porcelain, wood, rubber and plastic. The bullets are very suitable for working tough-to-reach insides. Shafts of Ø 2.35mm.
Diameter: 5mm
Flexible silicon discs
Used for surface smoothing and polishing of precious metals, non-ferrous metals, high-grade metals, glass, porcelain, wood, rubber and plastic. The bullets are very suitable for working tough-to-reach insides. Shafts of Ø 2.35mm.
Flexible silicon discs
Used for surface smoothing and polishing of precious metals, non-ferrous metals, high-grade metals, glass, porcelain, wood, rubber and plastic. The bullets are very suitable for working tough-to-reach insides. Shafts of Ø 2.35mm.
Diameter: 22mm
Holder for bits and cutters
For the clean storage of micro drills, grinding bits, brushes and other rotating tools with shaft diameters of 2.35 - 3.2mm. Without bits and cutters. 2 pieces are included in the delivery.
Replacement cutting discs
Made of ceramic compound: 50% aluminium oxide and 50% silicon carbide. Suitable for cutting steel, non-ferrous metal as well as small wood and ceramic bars.
KGS 80 Tungsten tipped Disc
Extremely clean cut edges thanks to high tooth count when cutting balsa, plywood, soft wood and glass reinforced plastic boards. Also for cutting hard wood, POLYCARBONATE, plastics and aluminium. Also for table saw FET.
KGS 80 Cutting disc with reinforcement
Corundum-bound and shatter-proof. For cutting alloyed and non-alloyed steel, stainless steel and non-ferrous metals. Also suitable for wood and plastics.
KS 230 Saw blade HSS
50mm diameter (10mm bore), 0.5mm thick. Alloy holding a high proportion of tungsten, vanadium and molybdenum for an even structure, high hardness and long lifetime. Fine-toothed. For very fine cuts in non-ferrous metals (aluminium, brass, copper). Also suitable for cutting compound materials like PC cards, and sawing wood and plastics.
Solid carbide saw blade
50mm diameter (10mm bore). 0.5mm thick. Fine toothed: ideal for cutting fibreglass sheets up to 3mm, non-ferrous metals, duro-plastics and other 'difficult' materials.
Self-adhesive type, for use with corundum bound sanding discs and sanding fleece. Ø 50mm.
With woven reinforcement, 50 x 1 x 10mm. For cutting steel, non-ferrous metals, plastic and wood. Ø 50mm.
For grinding tempered cast iron, cast iron, stainless steel, non-ferrous metals, wood and plastic. Low wear-resistant. Ø 50mm.
Used for de-burring, grinding, sharpening and derusting steel and non-ferrous metals. Ø 50mm.
Self-adhesive type, used for cleaning, matting and sanding of steel, stainless steel and non-ferrous metals. Also used for paint removal. Ø 50 mm.
Self-adhesive type, used for cleaning, matting and sanding of steel, stainless steel and non-ferrous metals. Also used for paint removal. Ø 50 mm.
Extra narrow bandsaw blade (3.5mm) for tight radii
Of special tempered steel, with induction-hardened coarse teeth (14 TPI). Especially suited for aluminium and plastics.
MBS 240/E Band Bimetal Saw Blades
Carrier belt of alloyed tempering steel, sawing teeth of wear-resistant high-speed steel. Varying teeth 10 - 14 TPI. Ideal for cutting all standard steel qualities, non-ferrous metals and stainless steel.
With two flute cutters and fishtail profile (cutting to the centre). Enables lowering into non-bored work pieces. For grey-cast iron, hardened cast iron, steel, cast steel, brass, aluminium, glass, plastic and carbon fibre. One piece each 1 - 2 and 3mm. Shaft diameter 3mm.
Tungsten carbide milling drill bits (spear drill bits)
For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.
Diameter: 1mm
Useful Length: 6mm
Tungsten carbide milling drill bits (spear drill bits)
For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.
Diameter: 2mm
Useful Length: 8mm
Tungsten carbide milling drill bits (spear drill bits)
For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.
Diameter: 3mm
Useful Length: 12mm