Brushes Steel Set 13mm
€4.90Steel brushes
High quality components for best operation. For cleaning, removing rust, sanding, frosting, roughening, rounding-off, etc. of metal, cast iron, plastic, stone and wood. Shaft of Ø 2.35mm.
Diameter: 13mm
Brushes Steel Set 8mm
€3.30Steel brushes
High quality components for best operation. For cleaning, removing rust, sanding, frosting, roughening, rounding-off, etc. of metal, cast iron, plastic, stone and wood. Shaft of Ø 2.35mm.
Diameter: 8mm
DB 250 Drill chuck with sliding sleeve
€17.07Drill chuck with sliding sleeve for the tailstock of the DB 250
Clamps up to 5mm. Is inserted on the spot of the rotating back centre. The feed movement results from sliding the complete tailstock.
Diamond Cutting Discs 20mm
€9.95Diamond cutting discs
Only 0.6 thick. For cutting and sanding of porcelain, ceramics, glass fibre boards, plastic and non-ferrous metals. Shaft of Ø 2.35mm.
Diameter: 20mm
Diamond Cutting Discs 20mm with Cooling Holes
€13.00Diamond-coated cutting discs with cooling holes
For cutting, grinding and deburring. Same application as described on the left. Less heating up due to cooling holes. No burn marks! Shaft Ø 2.35mm.
Diamond Cutting Discs 38mm
€8.15Diamond cutting discs
Only 0.6 thick. For cutting and sanding of porcelain, ceramics, glass fibre boards, plastic and non-ferrous metals. Shaft of Ø 2.35mm.
Diameter: 38mm
Diamond Cutting Discs 38mm with Cooling Holes
€10.00Diamond-coated cutting discs with cooling holes
For cutting, grinding and deburring. Same application as described on the left. Less heating up due to cooling holes. No burn marks! Shaft Ø 2.35mm.
Diamond Grinding Bits Set 1,2mm
Ball-shaped diamond-coated grinding bits for glass and stone
For drilling and machining of glass and types of stone reaching to granite. Recommended for use on drill presses with a speed of 2,000rpm with the addition of coolant. Shaft Ø 2,35mm.
Diameter: 1.2mm
Diamond Grinding Bits Set 2,2mm
€4.85Ball-shaped diamond-coated grinding bits for glass and stone
For drilling and machining of glass and types of stone reaching to granite. Recommended for use on drill presses with a speed of 2,000rpm with the addition of coolant. Shaft Ø 2,35mm.
Diameter: 2.2mm
Diamond Grinding Bits Set 3,2mm
€4.50Ball-shaped diamond-coated grinding bits for glass and stone
For drilling and machining of glass and types of stone reaching to granite. Recommended for use on drill presses with a speed of 2,000rpm with the addition of coolant. Shaft Ø 2,35mm.
Diameter: 3.2mm
Drill Bits Tungsten Carbide Set 1,5mm x 8mm
Made of wear-resistant tungsten carbide. For drilling glass, semiprecious stones, porcelain, ceramics, marble and other hard stones. The hard stones are subdivided according to the degree of hardness from 1 - 10. Tungsten carbide can be used up to hardness degree 6. Drilling hard stones with a hardness degree of more than 6 calls for the use of diamond tools. Shaft Ø 3.0mm. With ideal cutting angle of 6°.
Diameter: 1.5mm Length: 8mm
Drill Bits Tungsten Carbide Set 1mm x 8mm
€9.95Tungsten carbide drill bits
Made of wear-resistant tungsten carbide. For drilling glass, semiprecious stones, porcelain, ceramics, marble and other hard stones. The hard stones are subdivided according to the degree of hardness from 1 - 10. Tungsten carbide can be used up to hardness degree 6. Drilling hard stones with a hardness degree of more than 6 calls for the use of diamond tools. Shaft Ø 3.0mm. With ideal cutting angle of 6°.
Diameter: 1mm
Length: 8mm
Drill Bits Tungsten Carbide Set 2mm x 8mm
€11.90Tungsten carbide drill bits
Made of wear-resistant tungsten carbide. For drilling glass, semiprecious stones, porcelain, ceramics, marble and other hard stones. The hard stones are subdivided according to the degree of hardness from 1 - 10. Tungsten carbide can be used up to hardness degree 6. Drilling hard stones with a hardness degree of more than 6 calls for the use of diamond tools. Shaft Ø 3.0mm. With ideal cutting angle of 6°.
Diameter: 2mm
Length: 8mm
Engraving Device GE20 and GE70 Stencil Set
€12.10
Engraving Device Stylus
FET Saw Blades Diamond Coated
€46.60Diamond coated
Ø 85 x 0.7 x 10mm. Layer 'D100'. Ceramics, porcelain, tiles, stone, CFK, CRP and epoxy circuit boards.
Holder for bits and cutters
Holder for bits and cutters
For the clean storage of micro drills, grinding bits, brushes and other rotating tools with shaft diameters of 2.35 - 3.2mm. Without bits and cutters. 2 pieces are included in the delivery.
LHW Silicon Carbide Grinding Disc 60 Grit
€5.80Used on hard materials such as glass, stone, ceramics and even hardened steel. Ø 50mm.
MBS 240/E Diamond Blades
€139.85Diamond blade
For cutting stone, ceramics, glass or glass-fibre reinforced plastics. Only proper cooling of the diamond band will ensure optimally cut glass or ceramics and enable a long service life of the band. Sparingly coolant liquid can be applied with a brush.
OZI/E Diamond Cutting Blade
Diamond cutting blade oscillates, making it ideal for cutting metal, wood, PC cards, plastics, plaster of Paris and many other materials. The segment cut facilitates exact cutting right into corners. Also cuts marble, bricks, dry walling and many other materials. Ideal for interior finishing and sanitary and electrical installation. Ø 65mm
SP/E and BSG 220 Spare discs - Silicon Carbide
€3.62Corundum (grade N). With 12.7mm bore.
SP/E Polishing Set
€30.15Polishing set
Steel wire brush for de-rusting and cleaning steel and non-ferrous metals. Brass wire brush to polish non-ferrous metals and precious metals. Felt wheel is used on painted surfaces and the chamois and cotton wheels provide a high gloss finish on non-ferrous metals and precious metals.
THERMOCUT Replacement cutting wire
€9.70
Three-jaw steel drill chuck
€6.50Three-jaw steel drill chuck
For use with MICROMOT rotary tools Precision drill grinder FBS 12/EF, Precision drill/grinder FBS 240/E, MICROMOT 60/EF and Flexishaft 110/BF. Advantageous when working with different shafts. Capacity: 0.3 - 3.2mm.
Tungsten Carbide Rasp Cutter (3,2mm x 25mm)
€12.30
Wheels Steel Set 22mm (5 Pieces)
€8.90High quality components for best operation. For cleaning, removing rust, sanding, frosting, roughening, rounding-off, etc. of metal, cast iron, plastic, stone and wood. Shaft of Ø 2.35mm.
Diameter: 22mm
WP/E Polishing Felts Lambswool (2 Pieces)
€8.10Lambswool polishing disc
Of high quality, dense lambswool for polishing scratch-proof paints. With hook and loop fastening. Ø 50mm.