Disposables

Diamond coated

Ø 85 x 0.7 x 10mm. Layer 'D100'. Ceramics, porcelain, tiles, stone, CFK, CRP and epoxy circuit boards.

High-alloy special steel (HSS)

Ø 80 x 1.1 x 10mm, 250 teeth. Use on non-ferrous metals, soft and hard woods, laminates, GRP, CFK and composite boards.

Flexible silicon discs

Used for surface smoothing and polishing of precious metals, non-ferrous metals, high-grade metals, glass, porcelain, wood, rubber and plastic. The bullets are very suitable for working tough-to-reach insides. Shafts of Ø 2.35mm.

Diameter: 5mm

High quality corundum grinding bits

Bits and sets of fine, high quality materials of consistent hardness. Various shapes for the widest possible range of applications. For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel. Accurately dimensioned shafts of Ø 2.35 or 3mm ensure maximum concentricity.

Grinding rule: Soft materials = hard grinding bits; hard materials = soft grinding bits! 

Silicon carbide grinding bits

Fine particles of consistent hardness for engraving and frosting of glass, ceramics and stellites. Also for grinding tungsten carbide, chilled cast iron and other hard steel alloys. Shafts Ø 2.35mm.

High quality corundum grinding bits

Bits and sets of fine, high quality materials of consistent hardness. Various shapes for the widest possible range of applications. For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel. Accurately dimensioned shafts of Ø 2.35 or 3mm ensure maximum concentricity.

Grinding rule: Soft materials = hard grinding bits; hard materials = soft grinding bits! 

High quality corundum grinding bits

Bits and sets of fine, high quality materials of consistent hardness. Various shapes for the widest possible range of applications. For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel. Accurately dimensioned shafts of Ø 2.35 or 3mm ensure maximum concentricity.

Grinding rule: Soft materials = hard grinding bits; hard materials = soft grinding bits! 

High quality corundum grinding bits

Bits and sets of fine, high quality materials of consistent hardness. Various shapes for the widest possible range of applications. For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel. Accurately dimensioned shafts of Ø 2.35 or 3mm ensure maximum concentricity.

Grinding rule: Soft materials = hard grinding bits; hard materials = soft grinding bits! 

Circular saw blade Super Cut, 85mm, 80 teeth 85mm ''Super Cut '' crosscut saw blade for circular saws. Ø 85 x 0.5 x 10mm. 80 teeth. Use on hard and soft woods, plastics. For use with Proxxon table saws.

KGS 80 Tungsten tipped Disc

Extremely clean cut edges thanks to high tooth count when cutting balsa, plywood, soft wood and glass reinforced plastic boards. Also for cutting hard wood, POLYCARBONATE, plastics and aluminium. Also for table saw FET.

KS 230 Saw blade HSS

50mm diameter (10mm bore), 0.5mm thick. Alloy holding a high proportion of tungsten, vanadium and molybdenum for an even structure, high hardness and long lifetime. Fine-toothed. For very fine cuts in non-ferrous metals (aluminium, brass, copper). Also suitable for cutting compound materials like PC cards, and sawing wood and plastics.

KS 230 Saw Tungsten tipped saw blade

50mm Ø x 1.1mm (10mm bore). 20 teeth. For extremely clean cuts of balsa, plywood. Can also be used for cutting PC cards and POLYCARBONATE.

With woven reinforcement, 50 x 1 x 10mm. For cutting steel, non-ferrous metals, plastic and wood. Ø 50mm.

For grinding tempered cast iron, cast iron, stainless steel, non-ferrous metals, wood and plastic. Low wear-resistant. Ø 50mm.

Self-adhesive type, used on flat and convex surfaces. Ø 50 mm.

Used on hard materials such as glass, stone, ceramics and even hardened steel. Ø 50mm.

Diamond blade

For cutting stone, ceramics, glass or glass-fibre reinforced plastics. Only proper cooling of the diamond band will ensure optimally cut glass or ceramics and enable a long service life of the band. Sparingly coolant liquid can be applied with a brush.

Standard bandsaw blade

Of hardened Swedish steel. Fine-toothed (24 TPI). For steel and brass

Selected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling 

Diameter: 10mm

Recomended to be used with MICROMOT Steel Collets

Selected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling 

Diameter: 3mm

Recomended to be used with MICROMOT Steel Collets

Selected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling 

Diameter: 6mm

Recomended to be used with MICROMOT Steel Collets

Selected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling.

Diameter: 8mm

Recomended to be used with MICROMOT Steel Collets

Nylon fleece brushes

For cleaning, frosting and sanding steel, stainless steel, nonferrous metals, etc. Shaft Ø 2.35mm.

HSS immersion saw blades.  For exact square excavations and other forms. For making hatchways and windows in ship and aircraft models. Cuts wood, plywood, plastics and aluminium. Max. immersion depth 16mm.

OZI/E Sanding pads 150 Grit Set (25 Pieces)

Pack of 25 pieces high durability corundum (aluminium oxide) pads. Grain filled with special filler to prevent premature clogging. Deposited on special backing paper. Self-adhesive type.