Brushes Brass Set 13mm
€4.90Brass Brushes
Ideal for working on brass, brass alloys, copper, precious metals, semiprecious stones, plastic and wood. For cleaning of electronic components and circuit boards. Shaft of Ø 2.35mm.
Diameter: 13mm
Brushes Brass Set 8mm
€3.21Brass Brushes
Ideal for working on brass, brass alloys, copper, precious metals, semiprecious stones, plastic and wood. For cleaning of electronic components and circuit boards. Shaft of Ø 2.35mm.
Diameter: 8mm
Brushes Steel Set 13mm
€4.90Steel brushes
High quality components for best operation. For cleaning, removing rust, sanding, frosting, roughening, rounding-off, etc. of metal, cast iron, plastic, stone and wood. Shaft of Ø 2.35mm.
Diameter: 13mm
Brushes Steel Set 8mm
€3.30Steel brushes
High quality components for best operation. For cleaning, removing rust, sanding, frosting, roughening, rounding-off, etc. of metal, cast iron, plastic, stone and wood. Shaft of Ø 2.35mm.
Diameter: 8mm
BS/E Replacement Belts 120 Grit (5 Pieces)
€4.50BS/E Replacement Belts 180 Grit (5 Pieces)
€4.30Replacement belts for BS/E
Corundum on tear-resistant, woven backing. Sands metal, nonferrous metals, wood and plastics efficiently. 10 x 330mm.
BS/E Replacement Belts 60 Grit (5 Pieces)
€4.50Replacement belts for BS/E
Corundum on tear-resistant, woven backing. Sands metal, nonferrous metals, wood and plastics efficiently. 10 x 330mm.
BS/E Replacement Belts Silicon carbide 180 Grit (5 Pieces)
€5.50BS/E Replacement Belts Silicon carbide 180 Grit (5 Pieces)
Identical with the foregoing item, but with burrs made from silicon carbide for grinding and de-burring of glass and ceramics. Also suitable for grinding brass, steel and cast iron.
BSS/S Sanding bands 150 Grit (5 Pieces)
€7.76Pack of 5 pieces Grinding bands made from high-quality corundum (aluminium oxide). Mounted on a high-performance support. For the sanding of metal, non-ferrous metals, wood and plastics. Size: 40 x 260mm.
BSS/S Sanding bands 240 Grit (5 Pieces)
€7.76Pack of 5 pieces Grinding bands made from high-quality corundum (aluminium oxide). Mounted on a high-performance support. For the sanding of metal, non-ferrous metals, wood and plastics. Size: 40 x 260mm.
BSS/S Sanding bands 80 Grit (5 Pieces)
€7.76
Cut-off Wheels 20mm
Tungsten carbide cutting disc
Thickness approx. 2mm. For cutting and profiling wood, CFK, GRP, rubber, silicone. Cooling holes reduce heating up. Shaft Ø 2.35.
Cutting Blades Set ( 3 Pieces)
€5.10Cutting blades made of spring steel
0.1mm thick. For plastic, wood and non-ferrous metal. Shaft Ø 2.35mm. For freehand work, we recommend using the Protective Device.
Set Includes: 1 x Cutting Blade Ø16mm, 1 x Cutting Blade Ø19mm, 1 x Cutting Blade Ø22mm
Cutting Discs Set 22mm (50 Pieces)
Corundum cutting discs
Discs made of a special compound of diameter 22 or 38 x 0.7mm. Used to part alloys and metals, stainless steels and non-ferrous metals. Can also be used for cutting wood and plastic. Shaft of Ø 2.35.
Cutting Discs Set 22mm (50 Pieces)
€15.70Aluminium oxide cutting discs with reinforcement
The cutting discs are available in Ø 22 x 0.8mm and Ø 38 x 1.0mm. Nearly unbreakable, making them usable to remove stock. Will cut alloyed, standard and stainless steels, non-ferrous metals and even wood and plastic. Arbor shaft of Ø 2.35mm.
Cutting Discs Set 22mm with Arbor (10 Pieces)
€5.25Aluminium oxide cutting discs with reinforcement
The cutting discs are available in Ø 22 x 0.8mm and Ø 38 x 1.0mm. Nearly unbreakable, making them usable to remove stock. Will cut alloyed, standard and stainless steels, non-ferrous metals and even wood and plastic. Arbor shaft of Ø 2.35mm.
Cutting Discs Set 22mm with Arbor (10 Pieces)
€3.50Corundum cutting discs
Discs made of a special compound of diameter 22 or 38 x 0.7mm. Used to part alloys and metals, stainless steels and non-ferrous metals. Can also be used for cutting wood and plastic. Shaft of Ø 2.35.
Cutting Discs Set 38mm (25 Pieces)
Corundum cutting discs
Discs made of a special compound of diameter 22 or 38 x 0.7mm. Used to part alloys and metals, stainless steels and non-ferrous metals. Can also be used for cutting wood and plastic. Shaft of Ø 2.35.
Cutting Discs Set 38mm with Arbor (5 Pieces)
€3.65Corundum cutting discs
Discs made of a special compound of diameter 22 or 38 x 0.7mm. Used to part alloys and metals, stainless steels and non-ferrous metals. Can also be used for cutting wood and plastic. Shaft of Ø 2.35.
Cutting Discs Set 38mm with Arbor (5 Pieces)
€7.00Aluminium oxide cutting discs with reinforcement
The cutting discs are available in Ø 22 x 0.8mm and Ø 38 x 1.0mm. Nearly unbreakable, making them usable to remove stock. Will cut alloyed, standard and stainless steels, non-ferrous metals and even wood and plastic. Arbor shaft of Ø 2.35mm.
CW-matic Fine dust paper filter
€17.30
DB 250 Drill chuck with sliding sleeve
€17.07Drill chuck with sliding sleeve for the tailstock of the DB 250
Clamps up to 5mm. Is inserted on the spot of the rotating back centre. The feed movement results from sliding the complete tailstock.
DB 250 Five piece HSS chisel set
DB 250 Independent four jaw chuck
€38.30
DB 250 Three jaw chuck
€59.76
Diamond Cutting Discs 20mm
€9.95Diamond cutting discs
Only 0.6 thick. For cutting and sanding of porcelain, ceramics, glass fibre boards, plastic and non-ferrous metals. Shaft of Ø 2.35mm.
Diameter: 20mm
Diamond Cutting Discs 20mm with Cooling Holes
€13.00Diamond-coated cutting discs with cooling holes
For cutting, grinding and deburring. Same application as described on the left. Less heating up due to cooling holes. No burn marks! Shaft Ø 2.35mm.
Diamond Cutting Discs 38mm
€8.15Diamond cutting discs
Only 0.6 thick. For cutting and sanding of porcelain, ceramics, glass fibre boards, plastic and non-ferrous metals. Shaft of Ø 2.35mm.
Diameter: 38mm
Diamond Cutting Discs 38mm with Cooling Holes
€10.00Diamond-coated cutting discs with cooling holes
For cutting, grinding and deburring. Same application as described on the left. Less heating up due to cooling holes. No burn marks! Shaft Ø 2.35mm.
Diamond Grinding Bits (1,8mm x 5mm)
€2.75Diamond grinding bits
With consistently even coating of diamond dust. Bodies and shafts made from stainless steel. Used for grinding, engraving and chiselling steel (even chrome-cobalt alloy), glass, ceramics, porcelain and plastics. All shafts Ø 2.35mm.
Diameter: 1.8mm
Useful Length: 5mm
Diamond Grinding Bits 5mm
€5.44Diamond grinding bits
With consistently even coating of diamond dust. Bodies and shafts made from stainless steel. Used for grinding, engraving and chiselling steel (even chrome-cobalt alloy), glass, ceramics, porcelain and plastics. All shafts Ø 2.35mm.
Diameter: 5mm
Diamond Grinding Bits Set 1,2mm
Ball-shaped diamond-coated grinding bits for glass and stone
For drilling and machining of glass and types of stone reaching to granite. Recommended for use on drill presses with a speed of 2,000rpm with the addition of coolant. Shaft Ø 2,35mm.
Diameter: 1.2mm
Diamond Grinding Bits Set 1,8mm
€4.35With consistently even coating of diamond dust. Bodies and shafts made from stainless steel. Used for grinding, engraving and chiselling steel (even chrome-cobalt alloy), glass, ceramics, porcelain and plastics. All shafts Ø 2.35mm.
Diameter: 1.8mm
Diamond Grinding Bits Set 1mm
€4.22Diamond grinding bits
With consistently even coating of diamond dust. Bodies and shafts made from stainless steel. Used for grinding, engraving and chiselling steel (even chrome-cobalt alloy), glass, ceramics, porcelain and plastics. All shafts Ø 2.35mm.
Diameter: 5mm
Diamond Grinding Bits Set 2,2mm
€4.85Ball-shaped diamond-coated grinding bits for glass and stone
For drilling and machining of glass and types of stone reaching to granite. Recommended for use on drill presses with a speed of 2,000rpm with the addition of coolant. Shaft Ø 2,35mm.
Diameter: 2.2mm
Diamond Grinding Bits Set 3,2mm
€4.50Ball-shaped diamond-coated grinding bits for glass and stone
For drilling and machining of glass and types of stone reaching to granite. Recommended for use on drill presses with a speed of 2,000rpm with the addition of coolant. Shaft Ø 2,35mm.
Diameter: 3.2mm
Diamond Twist Drills Set 0,8mm x 5mm, 1,2mm x 5mm
€11.85For drilling holes in (semi) precious stones, etc. Shaft Ø 2.35mm.
Set Includes: 1 x Diamond Twist Drill Bit Ø0.8mm x 5mm, 1 x Diamond Twist Drill Bit Ø1.2mm x 5mm
Drill Bits HSS Set (10 Pieces)
HSS twist drill bit set with centring pin in storage case
6-piece set. Ø 1.5 - 2.0 - 2.5 - 3.0 - 3.5 - 4.0mm. For precision tapping of wood and plastics; also non-ferrous metal, steel and stainless steel sheets. Titanium coating reduces friction and increases service life. Shaft Ø 3mm, 6-piece set.
Drill Bits HSS Set (6 Pieces)
HSS twist drill bits in storage case
10-piece set. Similar to DIN 338. Ø 0.3 - 0.5 - 0.8 - 1 - 1.2 - 1.5 - 2 - 2.5 - 3 - 3.2mm. For drilling non-ferrous metal, steel and stainless steel. In labelled cassette with fold back and stand function. For clamping we recommend our 3-jaw drill chuck.
Drill Bits HSS Set 0,5mm x 6mm
€5.70Selected steel quality. Purpose-made stable construction with high concentricity. Shaft and bit are manufactured from a one-piece blank. High hardness for optimum life expectancy and elasticity. For drilling metal, non-ferrous metals, plastic, PC cards and wood. Work speeds: soft materials approx. 8,000rpm, hard materials approx. 3,000rpm. Ø shanks 2.35mm.
Diameter: 0.5mm
Useful Length: 6mm
Drill Bits HSS Set 0,8mm x 6mm
€5.70Selected steel quality. Purpose-made stable construction with high concentricity. Shaft and bit are manufactured from a one-piece blank. High hardness for optimum life expectancy and elasticity. For drilling metal, non-ferrous metals, plastic, PC cards and wood. Work speeds: soft materials approx. 8,000rpm, hard materials approx. 3,000rpm. Ø shanks 2.35mm.
Diameter: 0.8mm
Useful Length: 6mm
Drill Bits HSS Set 1,2mm x 8mm
€5.66Selected steel quality. Purpose-made stable construction with high concentricity. Shaft and bit are manufactured from a one-piece blank. High hardness for optimum life expectancy and elasticity. For drilling metal, non-ferrous metals, plastic, PC cards and wood. Work speeds: soft materials approx. 8,000rpm, hard materials approx. 3,000rpm. Ø shanks 2.35mm.
Diameter: 1.2mm
Useful Length: 8mm
Drill Bits HSS Set 1,6mm x 8mm
€5.70Selected steel quality. Purpose-made stable construction with high concentricity. Shaft and bit are manufactured from a one-piece blank. High hardness for optimum life expectancy and elasticity. For drilling metal, non-ferrous metals, plastic, PC cards and wood. Work speeds: soft materials approx. 8,000rpm, hard materials approx. 3,000rpm. Ø shanks 2.35mm.
Diameter: 1.6mm
Useful Length: 8mm
Drill Bits HSS Set 1mm x 8mm
€5.70
Drill Bits Tungsten Carbide Set 1,5mm x 8mm
Made of wear-resistant tungsten carbide. For drilling glass, semiprecious stones, porcelain, ceramics, marble and other hard stones. The hard stones are subdivided according to the degree of hardness from 1 - 10. Tungsten carbide can be used up to hardness degree 6. Drilling hard stones with a hardness degree of more than 6 calls for the use of diamond tools. Shaft Ø 3.0mm. With ideal cutting angle of 6°.
Diameter: 1.5mm Length: 8mm
Drill Bits Tungsten Carbide Set 1mm x 8mm
€9.95Tungsten carbide drill bits
Made of wear-resistant tungsten carbide. For drilling glass, semiprecious stones, porcelain, ceramics, marble and other hard stones. The hard stones are subdivided according to the degree of hardness from 1 - 10. Tungsten carbide can be used up to hardness degree 6. Drilling hard stones with a hardness degree of more than 6 calls for the use of diamond tools. Shaft Ø 3.0mm. With ideal cutting angle of 6°.
Diameter: 1mm
Length: 8mm
Drill Bits Tungsten Carbide Set 2mm x 8mm
€11.90Tungsten carbide drill bits
Made of wear-resistant tungsten carbide. For drilling glass, semiprecious stones, porcelain, ceramics, marble and other hard stones. The hard stones are subdivided according to the degree of hardness from 1 - 10. Tungsten carbide can be used up to hardness degree 6. Drilling hard stones with a hardness degree of more than 6 calls for the use of diamond tools. Shaft Ø 3.0mm. With ideal cutting angle of 6°.
Diameter: 2mm
Length: 8mm
DS 460 and DS 230/E Coarse-toothed blades (12 Pieces)
€4.54Coarse Toothed Blades (No. 9: 14 teeth per 25mm)
Super-Cut" scroll saw blades. High quality steel for extended use and prolonged cutting capacity. Standard version without pin. Hard and soft woods, plastic, Perspex and soft non-ferrous metal.
DS 460 and DS 230/E Fine-toothed blade (12 Pieces)
Fine Toothed Blades (No. 3: 41 teeth per 25mm)
Super-Cut" scroll saw blades. High quality steel for extended use and prolonged cutting capacity. Standard version without pin. Hard materials such as steel and PERTINAX.
DS 460 and DS 230/E Fine-toothed blades (12 Pieces)
€4.54Very fine-toothed blades (No. 1: 50 teeth per 25mm)
Super-Cut" scroll saw blades. High quality steel for extended use and prolonged cutting capacity. Standard version without pin. Hard and soft woods, plastic, Perspex and soft non-ferrous metal.
DS 460 and DS 230/E Standard-toothed blade (12 Pieces)
€4.54Standard Toothed Blades (No. 5: 17 teeth per 25mm)
Super-Cut" scroll saw blades. High quality steel for extended use and prolonged cutting capacity. Standard version without pin. Hard and soft woods, plastic, Perspex and soft non-ferrous metal.
DS 460 and DS 230/E Standard-toothed blades (12 Pieces)
€5.95Standard Toothed Blades (No. 5: 36 teeth per 25mm)
Super-Cut" scroll saw blades. High quality steel for extended use and prolonged cutting capacity. Standard version without pin. Hard materials such as steel and PERTINAX.
DS 460 and DS 230/E Very Fine-toothed blades (12 Pieces)
Fine Toothed Blades (No. 3: 20 teeth per 25mm)
Super-Cut" scroll saw blades. High quality steel for extended use and prolonged cutting capacity. Standard version without pin. Hard materials such as steel and pertinax.
DS 460 Blade Holders
DS 460 Spiral Blade with Plain Ends (12 Pieces)
€5.60
DS 460 Standard Coarse-toothed blades with Pins (12 Pieces)
€7.05DS 460 Standard Coarse-toothed blades with Pins (10 TPI per 25mm)
For cutting soft and hard wood, plastics as well as other soft materials and especially thicker work pieces.
DS 460 Standard Fine-toothed blades with Pins (12 Pieces)
€7.00DS 460 Standard Fine-toothed blades with Pins (25 TPI per 25mm)
For cutting soft and hard wood, plastics as well as other soft materials and especially thicker work pieces.
DS 460 Standard Normal-toothed blades with Pins (12 Pieces)
€7.00DS 460 Standard Normal-toothed blades with Pins (18 TPI per 25mm)
For cutting soft and hard wood, plastics as well as other soft materials and especially thicker work pieces.
