FF 230 and FF 500/BL Three Piece Set Centre Drill Set

Miller FF 500/BL-CNC

Characteristics:

• With brushless direct drive: Quiet and vibration-free with high precision (accuracy 0.05mm).
  
• Variable speed pre-selection from 200 - 4,000rpm with digit speed display.
  
• With double roller bearing recirculating ball spindles at all 3 axes and 3 powerful step motors for driving compound table and milling head.
  
• Large travel distances: X-axis: approx. 290mm, Y-axis: approx. 100mm, Z-axis: approx. 200mm.
  
• Stable column with dovetail slideway.
  
• Including user-friendly software. Runs under WINDOWS® (see description below).
  
• Thanks to CNC control of 3 tool axes machining of steel and non-ferrous metals is possible in all dimensions. This also applies to larger work pieces!
• Axes drive with recirculating ball spindles (no backlash) and powerful step motors.
• Otherwise the mechanical design is almost identical to the miller FF 500/BL: Solid, flat-milled compound table in steel with 3 continuous T-slots for size 8 standard T-nuts. Base of vibration-damping cast steel. Stable column with dovetail slideway. Milling head can be pivoted to the left and right by 90°, with powerful, quiet and shock-free running condenser motor.
• Poly V-belt drive for 6 spindle speeds (180 - 2,500/min).
• Additional sleeve feed (30mm) using drilling lever with scale ring (1 graduation line = 1mm). Work piece fixing using steel collets.
• Complete with CNC control unit, CNC programme software, all connecting cables, one each multiple range standard type ER 20 collets 6 - 8 - 10 and 12mm and detailed manual.

Miller FF 500/BL

With variable speed pre-selection from 200 - 4,000rpm and high precision (accuracy 0.05mm). With digital speed indication.

Characteristics:

• The sophisticated control via rotor position and speed sensors guarantees high torque for use of large milling cutters in the lower speed range.
• Solid column with dovetail guides. Milling head can be rotated to the left and right by 90° (with graduation).
• The clampable spindle sleeve is prepared for mounting of the fine feed adapter.
• Tool holder using multiple range collets type ER 20: One each of 6 - 8 - 10 and 12mm are included.
• Height adjustment of milling head via hand wheel.
• Solid plane-milled steel compound table with 3 continuous MICROMOT standard T-slots (12 x 6 x 5mm).
• All 3 hand wheels with graduated scale ring (1 rev. = 2mm).

FF 230 and FF 500/BL Edge Finder Set

Used for fast and accurate location of starting point of work pieces with respect to the machine spindle on milling machines. Size 6 x 6 x 50mm and 6 x 5 x 75mm. Comes in wooden box with sliding lid.